Keep your clothes water-repellent with KÜHL® Waterproof Wax made from an exclusive 100% natural blend of beeswax and plant-based ingredients. No oils, petroleum, or silicone, so your clothes stay as natural as you.
How to Rewax
Step 1: Testing Your Jacket
Spray water on your jacket and wait a few minutes.
If the water has soaked into the jacket, it must be re-waxed.
Before rewaxing, try using a hair dryer to soften the wax on your jacket. Rub out scratches and smooth over spots lacking coverage.
Step 2: Prepping Your Jacket
Lightly rinse off your jacket.
Take a stiff brush and remove any dirt and debris.
If needed, clean stubborn areas with mild soap.
Air-dry your jacket before continuing.
Step 3: Waxing Your Jacket
Test on a small area
Rub the block of KÜHL Wax onto the clean, dry garment in a thin, even layer using long strokes.
After you’ve applied the wax, use your hands/fingers to rub it evenly across the fabric and spread it out.
Melt the wax into the fabric using an iron set to low/medium heat (no steam); you can also use a hair dryer.
Repeat the process if necessary.
To remove wax, wash the garment at 40C (104F)
